Pro duct7 - Bulk Cloned-manufacture,factory,supplier from China

Product Details:Product:MDF Material:Polar Pine Combi HardwoodGlue:MDI UF MEL WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:0.8-18mm or accept customizationDensity:650-1000 KG/CBMMoisture content:3%-13%MOQ:20 CBMDelivery time:15-25 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsage:Roof decking, furniture,packing,hoarding,signboards, portable building, interior and outerior decoration,

Advantages of OSB BoardOSB (Oriented Strand Board) is a composite board made of wood veneer or strands, which has many advantages, these advantages include:1.Strength and Durability: OSB board is constructed of interlaced veneer veneers, making it stronger than traditional particle board. It is able to withstand greater loads and pressures and has better resistance to tearing, making it more durable.  2.Stability: Due to the way OSB panels are constructed, they are not susceptible to moisture and deformation.

Manufacturing Process Broadcast1. Chipping: It is the manufacturing workshop of the raw materials in the whole board production. It mainly cuts loose wood into wood chips that meet the production specifications, so as to provide better conditions for fiber separation in preparation for heat.2. Thermal grinding. The wood chips cut out of the chipping workshop are preheated and cooked, and then mechanically separated to obtain fibers.3. Fiber drying: heat grinding and sizing to make the moisture content of the fiber reach 40%-50%.

1. Physical and mechanical propertiesDue to the uniform fiber structure of the board and the high bonding strength between fibers, its static bending strength, plane tensile strength, elastic modulus, and screw-holding force are better than particleboard. Hygroscopicity, water absorption performance, thickness expansion rate is low.2. Decorative performanceBecause the surface of medium density fiberboard is flat and smooth, it is easy to glue planed veneer and tissue paper and other decorative materials, and it is easy to paint and save paint.3.

Medium density fiberboard    MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses. Therefore, it is widely used in furniture manufacturing, construction and interior decoration industries.    Medium density fiberboard is a homogeneous porous material with good acoustic performance. It is a good material for making speakers, TV shells and musical instruments.   In addition, it can also be used for ships, vehicles, sports equipment, floors, wallboards, diaphragms, etc.

Product DetailsSize1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%Thickness Tolerance+-0.2mmSize Tolerance+-2mmTransport Packageby Standard Exporting PalletsSpecification1220*2440OriginChinaHS Code4411142900Production Capacity30000 Cbm Monthly

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

1.

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

What is the main reason for the deformation of density board?The main reason for the deformation of the density board is the production process or the storage and use process.1.

    Particleboard, also known as chipboard, flakeboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.Method for judging the quality of particleboard wardrobes1. From the appearance point of view, look at the size and shape of the sawdust particles in the center of the cross section. The length is generally 5-10MM.

Particleboard Quality Judgment1. From the appearance point of view, look at the size and shape of the wood chips in the center of the cross-section. The length is generally 5-10MM in length. If the length is too long, the structure is loose, and if it is too short, the deformation resistance is poor, and the so-called static bending strength does not meet the standard;2. The moisture resistance of wood-based panels depends on its density and moisture-proof agent.

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

     Particleboard, also known as chipboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.

What are the advantages and disadvantages of commonly used density boards in the production of showcases?Advantages of MDF1. Because the density board is hard, it is not easy to deform. At the same time, it is not easy to warp because it is made of fine wood chips. At the same time, the MDF for display cabinets has high bending resistance and impact resistance.2.

    For furniture manufacturing, the most common and most widely used in the market is mainly MDF, with a density of 680~830KG/M3. It is widely used in the manufacture of cabinets, beds, wooden doors, tables and chairs, showcases and other furniture, as well as wooden items such as gift boxes, photo frames, stereos, props, etc. It is also a common board for interior decoration, basically most of the furniture around you Products have the material composition of density board.The surface of products with a thickness of 6mm or less can also be divided into matte and sanding effects.

     Density board is called medium density fiberboard（MDF) . It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure. According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. It is widely used in the fields of furniture manufacturing and decoration in China.Xinhua Wood Show  Xinhua Wood Machinery  Gaotang County Xinhua Wood Industry Co., Ltd.

Shopping skills of MDF Fiberboard:Environmental protectionAccording to national standards, MDF can be divided into E0, E1, and E2 according to its free formaldehyde content. The formaldehyde emission of E2 grade is ≤5mg/L; the formaldehyde emission of E1 grade is ≤1.5mg/L, which can be directly used for interior decoration; the formaldehyde emission of E0 grade is ≤0.5mg/L.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

Characteristics of OSB1. Wide sources of raw materials and low prices.The raw materials of directional particle board are mainly small diameter wood of soft coniferous wood and broad-leaf wood, fast-growing thinning forest, such as eucalyptus, Chinese fir, poplar thinning wood, etc., with a wide range of sources.2. High output rateCompared with other types of wood-based boards, oriented particle board has a higher output rate.